Can my APC battery backup be used for amplifications?


Posted March 11th, 2010 by admin 2 Comments »
battery backup
Benton asked:


i have an apc battery back up and i was wondering if i couls use it on a guitar amp (tube amp) without any problems

Plugging a surge protector into a power strip?


Posted October 15th, 2009 by admin 3 Comments »
surge protector
Cupooterluvr asked:


I wanted to be able to use the switch outlet, but my computer’s surge protector covers up the other hole… Can I plug the surge protector into a power strip (the plug isn’t angled on the power strip) without overloading it? Nothing is changing about the arrangement of the plugs on the surge protector except that I’m plugging a lamp into the switch outlet.

Does turning off a surge protector with a computer plugged into it, stop the computer from using power?


Posted October 10th, 2009 by admin 2 Comments »
surge protector
Computer Head asked:


When things are plugged in they use energy even when they are off, but does plugging the things into a surge protector and turning off the surge protector when not in use stop the power from going to the devices?

UPS battery discharged - Does UPS still provide surge suppression?


Posted September 24th, 2009 by admin 2 Comments »
backup battery
Steven asked:


The battery in my APC Back_UPS Pro 650 is discharged - but I do NOT want to purchase another battery or UPS because the stand alone computer system it is protecting will no longer be used in a couple of months.

Will that UPS (with the discharged battery) still provide surge suppression. I do realize that without a working battery, it can no longer go on battery backup nor automatically shutdown the computer.

Can we transfer power of electricity on to the laptop, through USB port?


Posted August 10th, 2009 by admin 4 Comments »
battery backup
DoubleO 7 asked:


I am doing a New Product Development project. And so, I was researching on a portable charging device (like a backup battery) which if plugged-in onto the USB of a laptop, would be able to give some battery life, at a time when there would be no access to sockets nearby.

I have an APC uninterruptible power supply for my computer?


Posted July 7th, 2009 by admin 1 Comment »
battery backup
ysm asked:


Everyday it beeps and goes to battery backup for a few seconds. Why is it doing this? What else should I do to ensure my electronics are safer? Thanks.

Which battery type is best for UPS?


Posted April 22nd, 2009 by admin No Comments »
battery backup
Suriya S asked:


i have 10 KVA Numeric UPS. Currently 20 SMF batteries has been connected. But is giving only 20 mins of backup time.
People say that backup time will get reduced very quickly in SMF batteries and advised to go for Tubular batteries.
Is it true? Which type of battery give more backup time atleast for next 3 to 4 years? is it SMF or UMF or Tubular?

Any help appreciated..

regards
Suriya

If I turn a strip surge protector off in order to save electricity will it still protect my electronic equip?


Posted April 9th, 2009 by admin 3 Comments »
surge protector
bse48 asked:


My laptop, printer, etc are plugged into a strip surge protector. If I turn the surge protector off in an effort to save money, will it still protect my equipment? I would like to turn everything off at night and turning the strip off would be convenient but I want to still have my electronic equip protected.

Can a surge protector damage my Corsair 1000 PSU in any way?


Posted April 3rd, 2009 by admin 1 Comment »
surge protector
Oz1981 asked:


And is it necessary to earth the surge protector. Because my installation does not have “earth/ground”. Thank you.

Motherboard bios problem?


Posted March 13th, 2009 by admin 5 Comments »
backup battery
jess7hk asked:


I tried to make it work but I discoverd a major problem. Everytime I disconnect the power cord from my system the BIOS ROM looses all his data; I tried to replace the backup battery and upgraded the bios to a newer release, it didn’t solve the problem.

Moreover is the motherboard in bad condition, the surface of the coolers and connectors are seriously scratched and a lot of pins are bended, two are broken.

Do you have any idea how I can solve the Bios ROM issue?