What is considered “electrical noise”?
Im2hard2please asked:
I have a computer battery supplied power backup and it shows this.
This entry was posted
on Friday, February 20th, 2009 at 12:00 am and is filed under Engineering.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
I have a computer battery supplied power backup and it shows this.
Never heard of electrical noise…..does anyone really know what it means?
There is a list of “Power Problems” that can cause the backup unit to take over and shut down the computer. They are listed as: Blackout, Undervoltage, Overvoltage, and Electrical Noise. Last night, my computer shut down due to “electrical noise”….we were having a severe wind storm and were expecting power outages that never came….but I did notice the lights dim a time or two before the backup unit took over.
February 21st, 2009 at 4:55 am
It literally shows the words “electrical noise”?
Anyway, in an ideal world, a (say) 5VDC power supply would output a voltage of exactly 5.000000V without any variation. Similarly, a 110VAC power supply would output a perfect 60Hz sine wave.
Now, in the real world, these ideal voltages are perturbed by “noise”. The source of noise can be anything from a loose contact somewhere to someone running an electric motor (for instance, in a vacuum cleaner) off the same AC line.
Generally, your power supply is supposed to filter out this noise, but I guess in your case it cannot. Without knowing more detail, I cannot help you trace the source of your noise.
February 24th, 2009 at 12:18 am
It means that the designer tells you how much ripple and regulation artifacts there will be on top of your power supply voltage. Usually it’s quite a lot. For a 5V or 12V computer supply this noise will be 50-100mVpp (peak-peak). A good benchtop power supply for the test lab would be at least two orders of magnitude less noisy, i.e. the ripple and noise would be below 1mVpp. The best supplies I have seen are around 100uVpp.
There are other cases of noise in electronics. For amplifiers one would specify Johnson noise and 1/f noise (low frequency noise). A good amplifier has 1-2nV/squrt(Hz) Johnson noise and 1uV 1/f noise in the 0.1-10Hz band. Needless to say these noise numbers are orders of magnitude below those of the power supply.
February 26th, 2009 at 1:44 pm
Electrical noise is any electrical signal that is not supposed to be there. There will always be some but it becomes a problem when it interferes with the intended signal. It widely misunderstood but can come from many places. There are a number of ways of preventing it being an issue, starting with making the signal so big that it cannot be affected and all kinds of filters, shielding and twisting of wires.
The problem of noise is predominantly with signals not power supplies so presumably your equipment is seeing noise in the communications. Keep signal cables away from power cables and ensure everything is grounded. Be aware of ground loops, its unlikely over small distances especially if everything is carefully bonded.