What type of motor and battery would I need to make a human-powered generator?
Patrick asked:
I had a 350W AC motor that did not work for this purpose. Do I need to have a DC motor? Also, what type of battery should I use? Obviously, it must be rechargeable so should I go with a lead-acid battery? This system will have a human-powered crankshaft, a motor, a battery, an inverter, and will need to produce 100W maximum to charge my laptop battery through the inverter.
This entry was posted
on Sunday, March 7th, 2010 at 12:00 am and is filed under Engineering.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
I had a 350W AC motor that did not work for this purpose. Do I need to have a DC motor? Also, what type of battery should I use? Obviously, it must be rechargeable so should I go with a lead-acid battery? This system will have a human-powered crankshaft, a motor, a battery, an inverter, and will need to produce 100W maximum to charge my laptop battery through the inverter.
March 7th, 2010 at 8:41 pm
what is the motor for? use a alternator!
and a car battery, for recharging purposes.
OK hook a alternator to a bike, hook the alternator to the battery, then the battery to the inverter, plug in your computer and start peddling.
as far as AC,DC goes, remember AC is highvoltage, DC is low voltage jason h
March 8th, 2010 at 6:39 am
The basics are that a fit person can generate about 1/2 h.p. for about 15 minutes. And this is if you’re pedaling.
A d.c. generator would probably be best with a converter and NiCad batteries.
If a 100 watts is all you need, a hand crank would probably work. Jim L
March 10th, 2010 at 7:49 am
You need an electric bicycle assist motor, which has the
“regenerative braking” feature.
Check out this site: AviationMetalSmith
March 11th, 2010 at 4:05 am
A permanent magnet DC motor would be the simplest. Then you don’t need to provide any field current, you just spin the motor. I question the need for an inverter if you are charging a laptop battery. Perhaps you can skip the inverter, bypass the normal laptop power supply, and just provide DC input.
The battery you choose should depend on how long you want it to last. If you are just using it to charge another battery, I don’t see why you need a battery at all, or maybe just a lightweight NiCad as a buffer, but I think you can definitely avoid carrying around a heavy lead acid battery.
I’d recommend looking at what input you really need for the laptop, and then think about a simple circuit to regulate the charge from a simple DC generator. EE Abe
March 13th, 2010 at 12:53 am
” as far as AC,DC goes, remember AC is highvoltage, DC is low voltage ”
Whoever told him that is very confused indeed. dmb06851